Peikko’s WELDA® Anchor Plates receive ETA approval and CE marking

Peikko’s WELDA® Anchor Plates have been issued ETA-16/0430 (European Technical Assessment). The ETA has been issued by DIBt (Deutsches Institut für Bautechnik) and it is based on extensive and demanding product tests conducted by VTT Expert Services Oy. At present Peikko is the only European company in the industry that can deliver anchor plates with an ETA based CE marking.

Anchor plates do not have a harmonised European standard (hEN), but the manufacturer can obtain a CE marking for such a product through the ETA process. An ETA enables the design and use of the products in the European Economic Area, so local product approvals are no longer needed. The ETA issued to Peikko covers anchor plates manufactured also according to customer specifications, so project specific approval processes can be avoided when using WELDA® Anchor Plates. Therefore, WELDA® Anchor Plates make the design process faster and more efficient.

Precast products used in the European Economic Area must have CE marking. There are anchor plates on the market that have CE marking based on an EN 1090 certified manufacturing process. They do not cover all the relevant construction products regulations, such as mechanical resistance in concrete. That is why an EN 1090 based CE marking does not contain the requirements of safe design and use of anchor plates, and is therefore misleading as well as illegal, according to Peikko. This is supported by CEN (European Committee for Standardization) and Tukes (Finnish Safety and Chemicals Agency), according to whom CE marking of anchor plates cannot be based on the harmonized standard EN 1090.

“Peikko’s aim is to market products and solutions that are safe and easy to use. In the case of WELDA® Anchor Plates, ETA based CE marking shows that WELDA® Anchor Plates are tested and approved. Thus, designers and contractors can be sure that WELDA® Anchor Plates fulfil the demands set by the authorities for anchor plates” states Topi Paananen, the CEO of Peikko Group Corporation.

 

Further information:

Topi Paananen, CEO, Peikko Group Corporation, mobile: +358 50 384 3001, email: [email protected] 

Pekka Paavola, Product Manager / Welded Connections, Peikko Group Corporation, mobile: +358 20 707 5281, email: [email protected]

Distribution: Main media, Peikko websites 

Links:  WELDA® Product Information / WELDA® ETA-16/0430 / WELDA® DoP (Declaration of Performance)

Peikko Group in brief:
Peikko Group Corporation is a leading global supplier of concrete connections and composite structures. Peikko’s innovative solutions make customers’ building processes faster, easier, and more reliable. Peikko has subsidiaries in 30 countries in Asia-Pacific, Europe, the Middle East, and North America, with manufacturing operations in 9 countries. Peikko’s turnover in 2016 was EUR 173 million. Peikko is a family-owned and run company that employs over 1,500 professionals. Peikko was founded in 1965 and is headquartered in Lahti, Finland. Further information: www.peikko.com.